2. What is VoltageMultiplier?
A voltage multiplier is an electrical circuit that converts AC
electrical power from a lower voltage to a higher DCvoltage,
typically usinga network of capacitorsanddiodes.
3. Typesof Voltage Multiplier
Depending on the output voltage, multipliers canbe of different types
VoltageDoublers
• Halfwavevoltagedoubler
• Fullwavevoltagedoubler
VoltageTipplers
VoltageQuadrupler
6. • Positive Half-Cycle
o D1 conducts
o D2 is switched off
o Capacitor C1 charges to Vm
• Negative Half-Cycle
o D1 is switched off
o D2 conducts
o Capacitor C2 charges to 2Vm
Vout = VC2 = 2Vm
HalfwaveVoltage Doubler
7. 7
• Positive Half-Cycle
o D1 conducts
o D2 is switched off
o Capacitor C1 charges to Vm
• Negative Half-Cycle
o D1 is switched off
o D2 conducts
o Capacitor C2 charges to Vm
Full Wave Voltage Multiplier
Vout = VC1 + VC2 = 2Vm
9. Voltage Tripler
During first positive half cycle:
• Diode D1 is forward biased whereas diodes D2 and D3 are reverse biased.
• Current will flows to the capacitor C1 and charges it toVm
During negative half cycle:
• Diode D2 is forward biased whereas diodes D1 and D3 are reverse biased.
• Current will flows to the capacitor C2 and charges it. The capacitor C2 is charged to twice the
peak voltage of the input signal (2Vm). This is because the charge (Vm) stored in the capacitor
C1 is discharged during the negative half cycle.
10. During second positive half cycle:
• Diode D3 is forward biased whereas diodes D1 and D2 are reverse
biased.
• As a result, the voltage (2Vm) across capacitor C2 is discharged.
This charge will flow to the capacitor C3 and charges it to the
same voltage 2Vm.
• The capacitors C1 and C3 are in series and the output voltage is
taken across the two series connected capacitors C1 and C3.
• The voltage across capacitor C1 is Vm and capacitor C3 is 2Vm.
So the total output voltage is equal to the sum of capacitor
C1 voltage and capacitor C3voltage
i.e. C1 + C3 = Vm + 2Vm = 3Vm.
12. Voltage Quadrupler
During first positive half cycle:
• Diode D1 is forward biased whereas diodes D2, D3 and
D4 are reverse biased.
• Current will flows to the capacitor C1 and charges it to
the input voltage I.e. Vm.
During first negative half cycle:
• Diode D2 is forward biased and diodes D1, D3 and D4 are reverse biased.
• Current will flows to the capacitor C2 and charges it. The capacitor C2 is charged to twice the peak
voltage of the input signal (2Vm). This is because the charge (Vm) stored in the capacitor C1 is
discharged during the negative half cycle.
• Therefore, the capacitor C1 voltage (Vm) and the input voltage (Vm) is added to the capacitor C2 I.e
Capacitor voltage + input voltage = Vm + Vm = 2Vm. As a result, the capacitor C2charges to 2Vm
13. During second positive half cycle:
• Diode D3 is forward biased and diodes D1, D2 and D4 are reverse biased.
• As a result, the voltage (2Vm) across capacitor C2 is discharged. This charge will flow to the capacitor
C3 and charges it to the same voltage 2Vm.
During second negative half cycle:
• Diodes D2 and D4 are forward biased whereas diodes D1 and D3 are reverse biased.
• As a result, the charge (2Vm) stored in the capacitor C3 is discharged. This charge will flow to the capacitor
C4 and charges it to the same voltage (2Vm).
• The capacitors C2 and C4 are in series and the output voltage is taken across the two series connected
capacitors C2 and C4.
• The voltage across capacitor C2 is 2Vm and capacitor C4 is 2Vm. So the total output voltage is equal to the
sum of capacitor C2 voltage and capacitor C4voltage I.e. C2 + C4 = 2Vm + 2Vm = 4Vm.
14. PracticleApplications
Voltage multipliers are used in:
• Cathode Ray Tubes (CRTs)
• Laser systems
• X-ray systems
• LCD backlighting
• Power supplies
• Oscilloscopes
• Particle accelerators
• Copy machines