1. Manuals
  2. Brands
  3. Asus Manuals
  4. Desktop
  5. Vintage V2-PE2
  6. User manual

Asus Vintage V2-PE2 User Manual

V-series desktop barebone
Hide thumbs Also See for Vintage V2-PE2:
Table of Contents

Advertisement

Quick Links

Download this manual
V-Series V2-PE2
ASUS PC (Desktop Barebone)

Advertisement

Table of Contents
loading

Related Manuals for Asus Vintage V2-PE2

Summary of Contents for Asus Vintage V2-PE2

  • Page 1 V-Series V2-PE2 ASUS PC (Desktop Barebone)
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Table of contents Notices ... vi Safety information ...vii About this guide ...viii System package contents ... x Chapter 1: System Introduction Welcome! ... 1-2 Front panel (external) ... 1-2 Rear panel ... 1-4 Internal components ... 1-7 LED panel ... 1-10 Chapter 2: Basic Installation Preparation ...
  • Page 4 ASUS EZ Flash utility ... 5-6 5.1.4 AwardBIOS Flash utility ... 5-7 5.1.5 Saving the current BIOS file ... 5-9 5.1.5 ASUS CrashFree BIOS 2 utility ... 5-10 BIOS setup program ... 5-11 5.2.1 BIOS menu screen ... 5-12 5.2.2 Menu bar ... 5-12 5.2.3...
  • Page 5 Table of contents 5.2.4 Menu items ... 5-13 5.2.5 Sub-menu items ... 5-13 Configuration fields ... 5-13 5.2.6 5.2.7 Pop-up window ... 5-14 5.2.8 General help ... 5-14 Main menu ... 5-15 5.3.1 System Time ... 5-15 5.3.2 System Date ... 5-15 5.3.3 Legacy Diskette A ...

  • Page 6: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.

  • Page 8: About This Guide

    About this guide Audience This guide provides general information and installation instructions about the ASUS Vintage V-Series V2-PE2 barebone system. This guide is intended for experienced users and integrators with hardware knowledge of personal computers. How this guide is organized...

  • Page 9: Conventions Used In This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS Websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to the ASUS contact information. Optional Documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.

  • Page 10: System Package Contents

    System package contents Check your Vintage V2-PE2 system package for the following items. If any of the items is damaged or missing, contact your retailer immediately. Item description ASUS Vintage V2-PE2 barebone system with • ASUS motherboard • 300 W PFC power supply unit •...
  • Page 11 Chapter 1 This chapter gives a general description of the ASUS Vintage V2-PE2. The chapter lists the system features including introduction on the front and rear panel, and internal components.

  • Page 12: Chapter 1: System Introduction

    Welcome! Thank you for choosing the ASUS Vintage V2-PE2! The ASUS Vintage V2-PE2 is an all-in-one barebone system with a versatile home entertainment feature. The system comes in a stylish casing and powered by the ASUS motherboard that supports the Intel...
  • Page 13 USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others. Headphone port. This Line In (green) port connects a headphone with a stereo mini-plug. Microphone port. This Mic (pink) port connects a microphone. ASUS Vintage V2-PE2...

  • Page 14: Rear Panel

    Rear panel The system rear panel includes the power connector and several I/O ports that allow convenient connection of devices. Power connector. This connector is for the power cable and plug. Voltage selector. This switch allows you to adjust the system input voltage according to the voltage supply in your area.
  • Page 15 2, 4, or 6-channel configuration. Audio 2, 4, or 6-channel configuration Port Headset 2-speaker Light Blue Line In Lime Line Out Pink Mic In ASUS Vintage V2-PE2 4-speaker 6-speaker Surround Out Surround Out Front Speaker Out Front Speaker Out Mic In Center/Bass...

  • Page 16: Voltage Selector

    Voltage selector The PSU has a 115 V/230 V voltage selector switch located beside the power connector. Use this switch to select the appropriate system input voltage according to the voltage supply in your area. If the voltage supply in your area is 100-127 V, set this switch to 115 V. If the voltage supply in your area is 200-240 V, set this switch to 230 V.

  • Page 17: Internal Components

    SPDIF_OUT AAFP Front panel cover 5.25-inch optical drive bays Hard disk drive bay Floppy disk drive bay Power supply unit CPU socket DIMM sockets ASUS Vintage V2-PE2 21.8cm (8.6in) LGA775 P4M890 PCIEX16 CR2032 3V Lithium Cell CMOS Power BIOS PCI1...
  • Page 18 Chapter 1: System introduction...
  • Page 19 Chapter 2 This chapter provides step-by-step instructions on how to install components in the system.

  • Page 20: Chapter 2: Basic Installation

    Preparation Before you proceed, make sure that you have all the components you plan to install in the system. Basic components to install 1. Central Processing Unit (CPU) 2. DDR2 Dual Inline Memory Module (DIMM) 3. Expansion card(s) 4. Hard disk drive 5.

  • Page 21: Removing The Side Cover And Front Panel Assembly

    Swing the front panel assembly to the right, until the hinge-like tabs on the right side of the assembly are exposed. Remove the front panel assembly, then set aside. Air duct Chassis tab holes ASUS Vintage V2-PE2...

  • Page 22: Central Processing Unit (Cpu)

    CPU socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. •...
  • Page 23 Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then fit the socket alignment key into the CPU notch. ASUS Vintage V2-PE2 PnP cap Load plate CPU notch Gold triangle...

  • Page 24: Installing The Cpu Fan And Heatsink Assembly

    Apply Thermal Interface Material on the CPU before closing the load plate. DO NOT eat the Thermal Interface Material. If it gets into your eyes or touches your skin, make sure to wash it off immediately, and seek professional medical help. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab.
  • Page 25 CPU Fan Connector Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. ASUS Vintage V2-PE2 CPU_FAN CPU FAN PWR CPU FAN IN...

  • Page 26: Installing A Dimm

    Install only identical (the same type and size) DDR2 memory modules. • Install only ASUS-certified memory modules. Refer to the DDR2 Qualified Vendors List on the next page for details. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor.
  • Page 27 512 MB Aeneon AET660UD00-370A98Z 512 MB Aeneon AET760UD00-370A98X 512 MB NANYA NT512T64U88A0F-37B 512 MB PQI MEAB-423LA 1024 MB Patriot PDC21G5600+XBLK 512 MB MDT M512-533-8 ASUS Vintage V2-PE2 Brand Side(s) Component E5116AB-5C-E HY5PS56821F-C4 D6408TE7BL-37 E1108AA-5C-E K4T56083QF-GCD5 K4T51083QB-GCD5 K4T56083QF-GCD5 HYB18T512800AC37 HYB18T512160AF-3.7 HYB18T512800AF37 HYB18T512800AF37 HYB18T1G800AF-3.7...

  • Page 28: Dimm Support

    DDR2-400 Size Vendor 512 MB KINGSTON KVR667D2N5/512 1024 MB KINGSTON KVR667D2N5/1G 512 MB KINGSTON KVR667D2E5/512 256 MB KINGSTON KVR667D2N5/256 256 MB SAMSUNG M378T3253FZ0-CE6 512 MB SAMSUNG M378T6453FZ0-CE6 256 MB SAMSUNG M378T3354CZ0-CE6 512 MB SAMSUNG M378T6553CZ0-CE6 1024 MB SAMSUNG M378T2953CZ0-CE6 256 MB MICRON MT8HTF3264AY-667B5 512 MB...

  • Page 29: Installing A Ddr2 Dimm

    Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force. Remove the DIMM from the socket. ASUS Vintage V2-PE2 Unlocked retaining clip Locked Retaining Clip DDR2 DIMM notch...

  • Page 30: Expansion Slots

    Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

  • Page 31: Standard Interrupt Assignments

    When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. ASUS Vintage V2-PE2 shared — —...

  • Page 32: Pci Express X1 Slot

    2.6.3 PCI Express x1 slot This motherboard supports PCI Express x1 network cards, SCSI cards and other cards that comply with the PCI Express specifications. The figure shows a network card installed on the PCI Express x1 slot. 2.6.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI...

  • Page 33: Installing An Optical Drive

    Connect one end of the IDE ribbon cable to the IDE interface at the back of the optical drive, matching the red stripe on the cable with Pin 1 on the IDE interface. ASUS Vintage V2-PE2 IDE ribbon cable Power cable 2-15...
  • Page 34 Connect the other end of the IDE ribbon cable to the secondary IDE connector (labeled SEC_IDE) on the motherboard. See page 4-7 for the location of this connector. Remove the dummy drive slot cover from the front panel. Replace the front panel. 2-16 Chapter 2: Basic installation...

  • Page 35: Installing A Hard Disk Drive

    With the HDD label side up, carefully insert the drive into the 3.5-inch bay and push the drive into the bay until its screw holes align with the holes on the drive bay. Secure the drive with two screws on both sides. ASUS Vintage V2-PE2 2-17...
  • Page 36 Connect one end of the Serial ATA cable to the SATA connector at the back of the drive, then connect the other end to a Serial ATA connector on the motherboard. See page 4-6 for the location of the Serial ATA connectors. Connect a 15-pin Serial ATA power plug from the power supply unit to the 15-pin power connector at the back of the drive.
  • Page 37 IDE ribbon cable to the IDE connector on the second (Slave) IDE hard disk drive. Connect a 4-pin power plug from the power supply unit to the power connector at the back of the drive(s). ASUS Vintage V2-PE2 Power cable 2-19...

  • Page 38: Installing A Floppy Disk Drive

    2.9 Installing a floppy disk drive The Vintage2-PE2 system comes with one 3.25-inch drive bay for a floppy disk drive. To install a floppy disk drive: Remove the front panel cover. Carefully insert the floppy disk drive into the floppy drive bay until the screw holes align with the holes on the bay.

  • Page 39: 2.10 Re-Connecting Cables

    Power Switch Power LED System Panel Connector Connect the reset button, power switch, power LED, and HDD LED cables to their respective leads in the system panel connector on the motherboard. ASUS Vintage V2-PE2 PLED PWRSW F_PANEL HD LED RESET 2-21...

  • Page 40: Reinstalling The Front Panel Assembly

    2.11 Removing the bay covers and reinstalling the front panel assembly and side cover If you installed an optical and/or floppy disk drive, remove the bay cover(s) on the front panel assembly before reinstalling it to the chassis. To do this: Locate the bay cover locks.
  • Page 41 Chapter 3 This chapter helps you power up the system and install drivers and utilities from the support CD.

  • Page 42: Chapter 3: Starting Up

    Screen display and driver options may not be the same for different operating system versions. • The contents of the support CD are subject to change at any time without notice. Visit the ASUS website for updates. 2000/XP operating systems ® Press to turn ON the system...

  • Page 43: Running The Support Cd

    If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the CD. ASUS InstAll - Installation Wizard for Drivers Automatically installs all the necessary drivers for this motherboard. VIA 4 in 1 Drivers Installs the VIA 4 in 1 driver.

  • Page 44: Utilities Menu

    This utility helps you keep your computer in healthy operating condition. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in a Windows environment. This utility requires an Internet connection either through ®...

  • Page 45: Make Disk

    Installs the Make JMicron JMB36X 32/64bit RAID Driver. 3.3.4 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide. ASUS Vintage V2-PE2...

  • Page 46: Software Information

    Autorun feature. If Autorun is not enabled in your computer, browse the contents of the support CD to locate the setup.exe file from the ASUS PC Probe II folder. Double-click the setup.exe file to start installation.
  • Page 47 When displayed, the monitor panel for that sensor also turns red. Refer to the Monitor panels section for details. Preferences You can customize the application using the Preference section in the main window. Click the box before each preference to activate or deactivate. ASUS Vintage V2-PE2...

  • Page 48: Hardware Monitor Panels

    Hardware monitor panels The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. The hardware monitor panels come in two display modes: hexagonal (large) and rectangular (small). When you check the Enable Monitoring Panel option from the Preference section, the monitor panels appear on your computer’s desktop.

  • Page 49: Dmi Browser

    DMI browser Click to display the DMI (Desktop Management Interface) browser. This browser displays various desktop and system information. Click the plus sign (+) before DMI Information to display the available information. ASUS Vintage V2-PE2 Small display ®...
  • Page 50 PCI browser Click to display the PCI (Peripheral Component Interconnect) browser. This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard disk drive space, and memory usage.

  • Page 51: Configuring Pc Probe Ii

    The Preference tab allows you to customize sensor alerts, change temperature scale, or enable the Q-Fan feature. Loads the default threshold values for each sensor Applies your changes ASUS Vintage V2-PE2 Cancels or Loads your saved ignores your configuration changes Saves your...
  • Page 52 Chapter 4 This chapter gives information about he motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations.

  • Page 53: Chapter 4: Motherboard Info

    Introduction The Vintage V2-PE2 barebone system comes with an ASUS motherboard. This chapter provides technical information about the motherboard for future upgrades or system reconfiguration. Motherboard layout KBPWR PS/2KBMS T: Mouse B: Keyboard ATX12V USB12 Bottom: Top: USB3 RJ-45 USB4...

  • Page 54: Jumpers

    6. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data. Clear RTC RAM Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default position. Removing the cap will cause system boot failure. ASUS Vintage V2-PE2 CLRTC Normal Clear CMOS (Default)
  • Page 55 USB device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode).
  • Page 56 (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. Keyboard Power Setting ASUS Vintage V2-PE2 KBPWR +5VSB (Default)

  • Page 57: Connectors

    Connectors Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided floppy disk drive (FDD) signal cable. Insert one end of the cable to this connector, then connect the other end to the signal connector at the back of the floppy disk drive. Pin 5 on the connector is removed to prevent incorrect cable connection when using a FDD cable with a covered Pin 5.
  • Page 58 Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices. If any device jumper is set as “Cable-Select”, make sure all other device jumpers have the same setting. ASUS Vintage V2-PE2 NOTE: Orient the red markings (usually zigzag) on the ID ribbon cable to PIN 1.
  • Page 59 CPU and Chassis Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350 mA~740 mA (8.88 W max.) or a total of 1 A~2.22 A (26.64 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.
  • Page 60 These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. Internal Audio Connectors Enable the CD-IN function in the audio utility when using this connector. ASUS Vintage V2-PE2 ATX12V EATXPWR +12VDC...
  • Page 61 Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC’97 audio standard. Azalia Analog Front Panel Connector We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.
  • Page 62 This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. COM Port Connector ASUS Vintage V2-PE2 CHASSIS (Default) COM2...
  • Page 63 12. System panel connector (10-1 pin PANEL) This connector supports several chassis-mounted functions. System Panel Connector The sytem panel connector is color-coded for easy connection. Refer to the connector description below for details. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
  • Page 64 Chapter 5 This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters.

  • Page 65: Managing And Updating Your Bios

    BIOS in the future. Copy the original motherboard BIOS using the ASUS Update or Award BIOS Flash utilities. 5.1.1 ASUS Update utility The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows allows you to: •...

  • Page 66: Updating The Bios Through The Internet

    Updating the BIOS through the Internet To update the BIOS through the Internet: Launch the ASUS Update utility from the Windows Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from...

  • Page 67: Updating The Bios Through A Bios File

    Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: Launch the ASUS Update utility from the Windows clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. Select Update BIOS from a file option from the drop-down menu, then click Next.

  • Page 68: Creating A Bootable Floppy Disk

    D: is your optical drive. e. Press <Enter>, then follow screen instructions to continue. Copy the original or the latest motherboard BIOS file to the bootable floppy disk. ASUS Vintage V2-PE2 desktop, then select My Computer. ® 2000: ®...

  • Page 69: Asus Ez Flash Utility

    5.1.3 ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is accessible by pressing <Alt>...

  • Page 70: Awardbios Flash Utility

    AwardBIOS Flash Utility. Follow these instructions to update the BIOS using this utility. Download the latest BIOS file from the ASUS web site. Rename the file to P5VD2MX.BIN and save it to a floppy disk. Save only the updated BIOS file in the floppy disk to avoid loading the wrong BIOS file.

  • Page 71: Restart The System

    BIOS file. Remove the floppy disk then press <F1> to restart the system. AwardBIOS Flash Utility for ASUS V1.17 (C) Phoenix Technologies Ltd. All Rights Reserved For P4M890-8237A-P5VD2-MX Flash Type - SST 49LF004B LPC (4MB) File Name to Program: P5VD2MX.bin...

  • Page 72: Saving The Current Bios File

    BIOS file to the floppy disk, then returns to the BIOS flashing process. ASUS Vintage V2-PE2 AwardBIOS Flash Utility for ASUS V1.17 (C) Phoenix Technologies Ltd. All Rights Reserved For P4M890-8237A-P5VD2-MX Flash Type - SST 49LF004B LPC (4MB) File Name to Program: P5VD2MX.bin...

  • Page 73: Asus Crashfree Bios 2 Utility

    5.1.6 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support CD or the floppy disk that contains the updated BIOS file.

  • Page 74: Bios Setup Program

    The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS file for this motherboard. ASUS Vintage V2-PE2 5-11...

  • Page 75: Bios Menu Screen

    The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website (www.asus.com) to download the latest BIOS information. 5-12 Configuration fields Phoenix-Award BIOS CMOS Setup Utility...

  • Page 76: Legend Bar

    A configurable field is enclosed in brackets, and is highlighted when selected. To change the value of a field, select it then press <Enter> to display a list of options. ASUS Vintage V2-PE2 Function Displays the General Help screen Loads setup default values...

  • Page 77: Pop-Up Window

    5.2.7 Pop-up window Select a menu item then press <Enter> to display a pop-up window with the configuration options for that item. Main Advanced Power System Time System Date Legacy Diskette A: Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave First SATA Master Second SATA Master...

  • Page 78: Main Menu

    5.3.1 System Time [xx:xx:xx] Allows you to set the system time. 5.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date. ASUS Vintage V2-PE2 Boot Exit 15 : 30 : 36 Thu, Apr 6 2006 [1.44M, 3.5 in]...

  • Page 79: Primary Ide Master/Slave

    5.3.5 Primary IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information. Main Primary IDE Master Access Mode Capacity Cylinder...
  • Page 80 FDISK, to partition and format new IDE hard disk drives. This is necessary so that you can write or read data from the hard disk. Make sure to set the partition of the Primary IDE hard disk drives to active. ASUS Vintage V2-PE2 5-17...

  • Page 81: First/Second Sata Master

    5.3.6 First / Second SATA Master While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press <Enter> to display the SATA device information. Main First SATA Master Extended IDE Drive...

  • Page 82: Hdd Smart Monitoring

    Incorrect field values can cause the system to malfunction. Phoenix-Award BIOS CMOS Setup Utility Main Advanced Power CPU Configuration Chipset PCIPnP Onboard Device Configuration USB Configuration ASUS Vintage V2-PE2 Boot Tools Exit Select Menu Item Specific Help Adjust system frequency/ voltage. 5-19...

  • Page 83: Cpu Configuration

    5.4.1 CPU Configuration Advanced CPU Type Intel Genuine Processor CPU Speed 3.80GHz Cache RAM 2048K Current FSB Frequency Delay Prior to Thermal Thermal Management TM2 Bus Ratio TM2 Bus VID Limit CPUID MaxVal Enhanced C1 (C1E) Excute Disable Bit Enhanced Intel SpeedStep(tm) Tech.[Disabled] CPU L1 &...

  • Page 84: Chipset

    Sets the DRAM clock. Configuration options: [By SPD] [200 MHz] [266 MHz]. DRAM Timing [Auto By SPD] Sets the DRAM Timing. Configuration options: [Manual] [Auto by SPD] [Turbo] [Ultra]. ASUS Vintage V2-PE2 [Disabled] [PCI-E] [64M] -/+: Change Value Enter: Select Sub-menu...
  • Page 85 Frequency/voltage control Advanced Frequency/Voltage control CPU Clock Ratio Async CPU/PCIE Clock CPU Clock Spread Spectrum ↑↓ : Select Item F1:Help →←: Select Menu ESC: Exit CPU Clock Ratio [19 X] Sets the CPU clock ratio by keying in a DEC number. Min = 14, Max = 19. Async CPU/PCIE Clock [Sync Mode] Sets the Async CPU/PCIE clock.

  • Page 86: Pcipnp

    When set to [Reserved], the IRQ is reserved for legacy ISA devices. Configuration options: [PCI Device] [Reserved] Assign IRQ for VGA [Enabled] Configuration options: [Enabled] [Disabled] Maximum Payload Size [4096] Configuration options: [128] [256] [512] [1024] [2048] [4096] ASUS Vintage V2-PE2 [No] Item Specific Help [Auto] [Enabled] [4096]...

  • Page 87: Onboard Device Configuration

    5.4.4 Onboard Device Configuration Advanced Onboard Device Configuration JMicron RAID controller SATA Controller SATA Controller Mode Ex-SATA/PCI-E*1 Option HDA Controller Onboard LAN Onboard LAN Boot ROM Serial Port1 Address Parallel Port Address Parallel Port Mode ECP Mode Use DMA Midi Port Address Midi Port IRQ ↑↓...

  • Page 88: Usb Configuration

    Enables or disables the USB 2.0 controller. Configuration options: [Disabled] [Enabled] USB Legacy support [Auto] Enable/Disable USB legacy device (USB keyboard and USB mouse) support. Configuration options: [Auto] [Enabled] [Disabled] ASUS Vintage V2-PE2 [Enabled] Item Specific Help [Enabled] [Enabled] Enable or Disable the USB Controller.

  • Page 89: Power Menu

    Power menu The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options. Main Advanced Power ACPI Suspend Type ACPI APIC support APM Configuration...

  • Page 90: Apm Configuration

    Power on By RTC Alarm [Disabled] Enable or disable Power on by RTC Alarm function.When this function is enabled, you can set the date and time of the resume by alarm function. Configuration options: [Insant-Off] [Suspend] ASUS Vintage V2-PE2 [Disabled] Item Specific Help [Disabled]...
  • Page 91 Restore on AC Power Loss [Power Off] Allows you to select to/not to restart the system after AC power loss. Configuration options: [Power Off] [Power On] [Last State] PWR Button < 4 secs [Instant-Off] When sets to [Instant-Off], the system will go to Soft-off instantly when power-button pressed for less than 4 seconds.

  • Page 92: Hardware Monitor

    (RPM). These items are not user-configurable. CPU Fan Speed warning [ 800 RPM] Allows you to disable or set the CPU fan warning speed. Configuration options: [Disabled] [800 RPM] [1200 RPM] [1600 RPM] ASUS Vintage V2-PE2 [Enabled] Item Specific Help [1.29V] [3.33V]...

  • Page 93: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Main Advanced Power Boot Device Priority Removable Drives Hard Disk Drives Boot Settings Configuration Security ↑↓ : Select Item F1:Help →←: Select Menu ESC: Exit...

  • Page 94: Boot Settings Configuration

    Selects power on state for NumLock. Configuration options: [Off] [On] Typematic Rate Setting [Disabled] Keystrokes repeat at a rate determined by the keyboard controller - when enabled, the typematic rate and typematic delay can be selected. Configuration options: [Disabled] [Enabled] ASUS Vintage V2-PE2 Boot [Enabled] [Enabled] [Disabled]...

  • Page 95: Security

    OS Select for DRAM > 64MB [Non-OS2] Set this item to OS2 only when you are running on an OS/2 operating system with an installed RAM of greater than 64 KB. Configuration options: [Non-OS2] [OS2] Full Screen LOGO [Enabled] Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled] Halt On [All, But Keyboard] Allows you to error report type.

  • Page 96: Exit Menu

    Exit & Save Changes Exit & Discard Changes Load Setup Default Discard Changes ↑↓ : Select Item F1:Help →←: Select Menu ESC: Exit ASUS Vintage V2-PE2 Boot Tools Exit -/+: Change Value Enter: Select Sub-menu Select Menu Item Specific Help...

  • Page 97: Asus Ez Flash 2

    System Date, System Time, and Password, the BIOS asks for a confirmation before exiting. ASUS EZ Flash 2 Press Enter to run ASUS EZ Flash 2 utility. Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus.

This manual is also suitable for:

V series

Table of Contents